2S Go/No-Go Bridge Gauge SOP
Download PDF:
PDF Version
Introduction
The 2S Go/No-Go Bridge Gauge is a precision tool designed to verify the thickness of main bridges. It is made from 4140 multipurpose alloy steel and features two precisely machined gaps. The main bridges are tested by passing them through these gaps to ensure they meet the required specifications.
...
PS-s Carrier Plate
Introduction
Use this guide to assemble the carrier plate for the PS-s module.
Important! Wear gloves while handling the plate: The carrier plate is coated with ESD-safe material. To prevent degradation of the coating by finger grease and dirt, avoid direct contact with the plate.
Materials
Part
...
Module Carrier Box
Introduction:
It just takes 10 minutes to save hundreds of work hours by giving a safe and low-humidity travel to the CMS experiment assembled modules.
This guide will explain step by step how to ensure the modules inside their carrying boxes.
Important! Read this guide before shipping any modules: Otherwise you may be ruining months of work....